Outstanding picture quality deserves powerful HiFi sound. Modern TVs impress with razor-sharp, detail-rich images. But when it comes to sonic depth, dynamics, and expression, built-in speakers remain limited by design. Big pictures deserve big sound: The HDMI (e)ARC Audio Extractor turns your TV into a full-fledged HiFi source within your stereo system, unlocking every sonic nuance that only your HiFi components can truly deliver. It taps the audio signal directly from your TV's HDMI ARC/eARC port and converts it into an analogue stereo signal - available via either: 3.5 mm stereo jack or RCA left/right Both outputs deliver sound simultaneously, so you can run active speakers and headphones in parallel, for example. With the HDMI audio converter, you can effortlessly integrate your TV into: high-quality stereo amplifiers powerful active speakers purist HiFi setups headphone solutions with or without a preamp The result? More transparency in dialogue More structure and control in the bass More air and separation between instruments More dynamics in live concert recordings Film scores gain depth, live recordings unfold greater spaciousness, and dialogue stands out with precision at the center. Your TV delivers the picture. Your HiFi system takes care of the sonic performance. Important compatibility note: The eDAC-200A supports stereo PCM / LPCM 2.0 (up to 192 kHz / 24-bit). It is not a Dolby/DTS decoder. For the converter to output audio correctly, the TV must be set in its menu to PCM or stereo (not Dolby Digital, DTS, or bitstream). This setting is usually found under "Sound" → "Digital Audio Output" in the respective TV software. Important note on volume control The TV remote control does not adjust the volume of the connected amplifier or speakers. Volume must be adjusted directly on the amplifier, active speakers, or headphone amplifier.
Outstanding picture quality deserves powerful HiFi sound. Modern TVs impress with razor-sharp, detail-rich images. But when it comes to sonic depth, dynamics, and expression, built-in speakers remain limited by design. Big pictures deserve big sound: The HDMI (e)ARC Audio Extractor turns your TV into a full-fledged HiFi source within your stereo system, unlocking every sonic nuance that only your HiFi components can truly deliver. It taps the audio signal directly from your TV's HDMI ARC/eARC port and converts it into a digital audio signal - available via either: Toslink (optical) RCA coaxial Both outputs deliver sound simultaneously, so you can leave an AV receiver and a soundbar permanently connected and switch between them as needed – no cable swapping required. With the HDMI audio converter, you can effortlessly integrate your TV into: powerful AV receivers modern soundbars with a digital input surround sound setups (5.1) powerful active speakers with a Toslink/coaxial input The result? More transparency in dialogue More structure and control in the bass More spaciousness through true 5.1 surround More dynamics in live concert recordings and films Film scores gain depth, live recordings unfold greater spaciousness, and dialogue stands out with precision at the center. Your TV delivers the picture. Your HiFi system takes care of the sonic performance. Important compatibility note: The HDMI (e)ARC Audio Extractor supports LPCM 2.0 as well as Dolby® 5.1 and DTS® 5.1 as a digital bitstream signal. It is not a decoder itself – decoding is handled by your connected AV receiver or soundbar. Make sure the TV's digital audio output is set in the menu to the desired format (PCM, Dolby Digital, or bitstream). This setting is usually found under "Sound" and then "Digital Audio Output" in the respective TV software. Important note on volume control The TV remote control does not adjust the volume of the connected receiver or speakers. Volume must be adjusted directly on the AV receiver, soundbar, or active speakers.
Innovative high-end antenna connector made of solid metal with gold-plated contacts. Simple, safe and time-saving "twist-on assembly".
Innovative high-end antenna connector made of solid metal with gold-plated contacts. Simple, safe and time-saving "twist-on assembly".
Innovative high-end antenna connector made of solid metal with gold-plated contacts. Simple, safe and time-saving "twist-on assembly".
Innovative high-end antenna connector made of solid metal with gold-plated contacts. Simple, safe and time-saving "twist-on assembly".
Professional high-end F-connector. Simple installation without screws or crimping. The connector is simply plugged into the prepared cable and locks into place automatically.
Coax tool suitable for the cable #006260036 and the connector #00652123 with wrench for tightening the connectors on the devices.
Converter with one HD-Base-T input and one HDMI output as well as additional Ethernet connection and IR and RS-232 channel (bidirectional) (forward or back). Suitable for HD-Base-T transmitters, splitters and matrix.
Converter with one HD-Base-T input and one HDMI output as well as an additional Ethernet connection and IR and RS-232 channel (bidirectional). This unit is supplied with power via the CAT cable (PoE). Suitable for HD-Base-T transmitters, splitters and matrix with PoE support.
Converter with one HD-Base-T input and one HDMI output as well as additional Ethernet connection and IR channel (forward or back). Suitable for installation boxes (double box). Suitable for HD-Base-T transmitters, splitters and matrix.
The professional HDMI 2.0 repeater amplifies and enhances the HDMI signal so that HDMI cables can be extended and bridge larger distances. Thanks to the latest technology, the repeater supports the current 4K60Hz 4:4:4 formats (18Gbps) and is downwards compatible. It is simply installed between the HDMI cables using Plug & Play and automatically supplied with power via the HDMI socket (no extra power supply required). During installation, the longer HDMI cable is installed between the source and the repeater and the shorter HDMI cable between the repeater and the TV/projector
With the Premium HDMI DVI adapter, cables and components with DVI standard can be integrated into HDMI chains. With gold-plated contacts. DVI-D (m) -> HDMI (f) or HDMI (m) -> DVI-G (f).
Compact HDMI angle adapter with gold-plated contacts for solving various installation problems.
An HDMI angle adapter that can be swiveled in all directions for connection of an HDMI cable at an angle. Ideal for confined spaces behind the LCD, plasma TV etc.
Adapter for connecting an HDMI cable to devices with a micro HDMI input, such as tablet PCs, cameras, smartphones, etc.
The HDMI double coupling for connecting two HDMI cables. The two assembly straps make it suitable for front panel installation as well. This allows prefabricated HDMI cables to be used and makes installation easier.
The HDMI double coupling for connecting two HDMI cables. The two assembly straps make it suitable for front panel installation as well. This allows prefabricated HDMI cables to be used and makes installation easier.
The Premium HDMI double coupling with cable has a round socket with a screw thread and nut. A simple hole made with a step drill is adequate for installation (e.g. in front panels). Complicated square shapes are not necessary. This enables clean and fast installations.
The adapter converts the HDMI signal into an analog VGA signal. It supports all common image formats and adapts the output format accordingly if required. An analog stereo audio output is also available (3.5 mm jack). Connectors: HDMI type C (Mini)
The adapter converts the HDMI signal into an analog VGA signal. It supports all common image formats and adapts the output format accordingly if required. An analog stereo audio output is also available (3.5 mm jack). Connectors: HDMI type A (standard)
VGA double coupling with 25 cm cable. A socket can be fitted (e.g. in a front panel) using two screw straps. This allows prefabricated cables to be used and makes installation easier.
15-pin VGA (SUB-D) socket with soldered connections and gold-plated contacts.
Professional and solid S-Video connector (Mini DIN) for S-Video cables up to 7.0 mm, 24k gold-plated contacts.
