After fitting the base rails, it is recommended you fit the cover rails from bottom to top, so that you need only perform one cut on site to adjust the length to the height of the roof.
First, install the base rail of the skirting boards. Then fit the base rail of the wall columns. Finally, mount the ceiling. There is a special connection piece for connecting the skirting board to the flat wall column. This is not necessary with wall columns that are deep and it is not necessary with corner columns either.
The standard dimensions of the base rails are 1.80 m or 0.90 m. The standard length of the cover rails is always 0.90m. Special lengths can be procured upon request.
All sockets and power switches with a central aperture of either 55 mm by 55 mm, 64 mm by 64 mm or 71 mm by 71mm can be employed. These include products from manufacturers such as Gira, Merten, Jung, and BuschJaeger
There are special mountable loudspeakers for this purpose, which can be selected for between one and five devices in the standard system, depending on the equipment employed. Upon request, loudspeakers can be supplied for connection to even more devices.
No, the normal frames of the switches are replaced by the covers of the wall column. These are available with 1-5 openings with the dimensions 55 mm by 55 mm, 64 mm by 64 mm and 71 mm by 71 mm.
AmbienTrack
